我自己的两个查了一下，已经得到检索。

http://www.engineeringvillage.com/blog/document.url?mid=cpx_M3cfd63231481dad3ec3M7b5810178163125&database=cpx

Calibration of accelerometer with multicomponent inputs

Guan, Wei Meng, Xiaofeng; Dong, Xueming

¹ Science and Technology on Inertial Laboratory, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

² Changcheng Institute of Metrology and Measurement, Beijing 100095, China

For reducing the inconsistency of sensors' characteristics in laboratory and working conditions, calibration of an accelerometer with multicomponent inputs is introduced. After a review of current equipments which are capable of producing combined accelerations, we introduced a different apparatus which can offer simultaneous harmonic and constant linear accelerations. It consists of a vibration exciter mounted on a centrifuge. With reference to the output model of the machine, we present a calibration method based on the vibration rectification error of accelerometer. The method is a multi-orientation test scheme with four different configurations and numerically validated in this paper. More investigations are needed to improve the calibration of accelerometer with multicomponent accelerations. © 2014 IEEE.(12 refs)

http://www.engineeringvillage.com/blog/document.url?mid=cpx_M3cfd63231481dad3ec3M7aec10178163125&database=cpx

Accelerometer transverse sensitivity testing with double turntable centrifuge

Guan, Wei Meng, Xiaofeng; Dong, Xueming

¹ Science and Technology on Inertial Laboratory, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

² Changcheng Institute of Metrology and Measurement, Beijing 100095, China

An approach suitable for calibrating the transverse sensitivity of accelerometer at low-frequency is presented in this work. The method proposed here employs the double turntable centrifuge as the apparatus to provide standard reference accelerations. Numerical simulation and experimental investigation are done to validate the method. Testing results of a single-Axis inertial accelerometer are consistent with the simulation. Typical '8' figure of the accelerometer transverse sensitivity is obtained. Both the simulation and experiment results show that the testing of the accelerometer transverse sensitivity of with the double turntable centrifuge is practicable.. © 2014 IEEE.(12 refs)