Full Paper

Microstructures and Mechanical Properties of Commercial Hot-Extruded Copper Processed by Torsion Deformation† Abstract

Free-end torsion deformation is used for processing copper rod in this work. Both microstructures and mechanical properties of the torsional rods are quantitatively analyzed. The results show that gradient lamellar dislocation substructures (LDS) along the radial direction as the main defects are formed after torsion. The increment of the LDS density, the shrinking of spacing size, and the change of length/spacing (L/S) ratio of the LDS are all non-monotonic function of torsion revolution. High-density LDS with fine spacing can retain strain hardening capability, which results in good combination of high tensile strength and good ductility in the torsional deformed sample with large number of revolutions. The influence of torsion strain on primary twin boundaries (TBs) in the hot-extruded rod is also discussed.

http://onlinelibrary.wiley.com/doi/10.1002/adem.201600252/full

转载本文请联系原作者获取授权，同时请注明本文来自郭宁科学网博客。
链接地址：https://blog.sciencenet.cn/blog-58154-998825.html

上一篇：室温扭转变形扭转速率对镁合金微观组织及硬化行为的影响规律
下一篇：最中意的论文老是不被引用，不怎么中意的却被顶尖杂志引用......